Age: 2013
Availability: Immediately
Description:
Model 220 Rotary Placer Key
Each head has one stem with a single bellows vacuum cup
The placer arm is driven by a servo motor and right angle gearbox
The placement of product is controlled by the servo controller and the system has a touch screen HMI operator interface, which allows for a variety of options and applications
The placer is equipped with a surface speed encoder and photoeye to detect sheets of paper for product placement
In the standard placer operation the arm is stopped in the “home”positions to wait for sheets on the conveyor
When a sheet is detected, the placer arm starts to rotate and accelerates to match the speed of the vacuum cup with the speed of the sheet of paper
An air cylinder is commanded to position a key in the escapement and withdraw for clearance of the vacuum cup
The vacuum is turned on, the vacuum cup contacts the key and the rotation of the arm removes the key from the escapement
The position of the rotary arm is adjusted during rotation; to release the key onto the sheet of paper at the required distance past the
The servo controller is programmed to make minor adjustments for variations in conveyor belt speed and in the absolute location of the leading edge of the sheet.
width = 1/2” Min
height = 1/2”
width = 3” Max height = 2”
Output is dependent on the handling characteristics of the product and the process limitations.
electricityPrice: On Request
Please leave us message and we will get back to you soon.
Or Call: + 1 404-861-3145