The Morgana AutoCreaser Pro 33A is a fully automatic suction feedingcreasing system designed for use with both conventional litho and digitalprinters.T...
The Morgana AutoCreaser Pro 33A is a fully automatic suction feedingcreasing system designed for use with both conventional litho and digitalprinters.The feed on the AutoCreaser Pro 33A can also be manually operated for usewith heavy stock, very small or very large sheets, embossed or even irregularsheets.The crease is programmed from the leading edge of the sheet using thecontrols on the front panel.The blade and anvil are mechanically controlled over their entire lengthand can be adjusted to accommodate various weights of m...
Machine for gluing books Muller Martini ACORO maschnr 1395734 year 2008 - installed 2009 2 Hand fed station, 16 station automatic typ 1571.0415 Feede...
Machine for gluing books Muller Martini ACORO maschnr 1395734 year 2008 - installed 2009 2 Hand fed station, 16 station automatic typ 1571.0415 Feeder criss-cross block collecting typ 3635 Binder 20 Stapler, Ruffer, cutting, suction unitGluing hotmelt typ ICS C80 i PUR typ MOD 30VPN Block gling typ CLS C18 cover feeder Three knife trimmer typ 3671 Stapler CB16 typ 3631...
Comes with a 2006 Apollo Stacker 6 x 1551 Feeders, 1528 Cover Feeder, Digital Screen Control, Presto Stitching Unit, 2 Stitching Heads 1522 3 Knife Tri...
Comes with a 2006 Apollo Stacker 6 x 1551 Feeders, 1528 Cover Feeder, Digital Screen Control, Presto Stitching Unit, 2 Stitching Heads 1522 3 Knife Trimmer, Shingle Delivery, Manuals & Tools Air Pumps...
1993 OMEGA II SADDLE BINDER SN 600105, W/DURANT DUAL PRESET 6 DIGIT ELECTRONIC CONTROLS AND K.SMACEY COVER FOLDER (MOD CFF, SN 630121)Omega II will g...
1993 OMEGA II SADDLE BINDER SN 600105, W/DURANT DUAL PRESET 6 DIGIT ELECTRONIC CONTROLS AND K.SMACEY COVER FOLDER (MOD CFF, SN 630121)Omega II will go fast6 Pocket Sadddle Cover Feeder Stitcher/TimmerVery clean machine and well maintained3 Honer Stitcher heads with manuals and lots of spare-partsAll guards and covers intact3 spare blades and 3 spare shearsManuals for the stitcher and the counter...
Profold's LINX family of tabbers consists of three models; LINXDX, LINX and LINXHThese are all high production floor model units designed for multipl...
Profold's LINX family of tabbers consists of three models; LINXDX, LINX and LINXHThese are all high production floor model units designed for multiple shift operationThe LINXDX is the only tabber with a built-in height adjustable register table that can be raised or lowered to match the passline of most mailroom equipmentThe patented bump-turn assembly is used for in line operation with folders, three knife trimmers or other equipment where the product needs to be turned ninety degrees prior to tabbing or labeling Pro...
Maximum Material Size: 2600:10 3/4 inW x 14 inL (27.31 cm x 35.56 cm) 11 3/4 inW x 14 inL (29.85 cm x 35.56 cm) Minimum Material Size:3 3/4 in....
Maximum Material Size: 2600:10 3/4 inW x 14 inL (27.31 cm x 35.56 cm) 11 3/4 inW x 14 inL (29.85 cm x 35.56 cm) Minimum Material Size:3 3/4 inW x 2 1/2 inL (9.53 cm x 6.35 cm) 2 inW x 2 1/2 inL (5.08 cm x 6.35 mm) Thickness Range:.003 into .5 in(.076 mm to 12.7 mm) .003 into 1 in(.076 mm to 25.4 mm) Printing/Labeling Productivity:Up to 144,000/hour (business cards) Inserter Productivity:10,000/hour (product dependent) Belt Speed: 9,000 in./minute (228.59 m/minute) Hopper Capacity: 24 in(60.96 cm) ...
TRS 1298/30 4 and WRS 199/44 with Pile feeder The unit is a generation 2 machine, capable of both T and L perfsRemove right angle and use traditional...
TRS 1298/30 4 and WRS 199/44 with Pile feeder The unit is a generation 2 machine, capable of both T and L perfsRemove right angle and use traditional 8/16 page sections from your folderThe main unit can register down to a 7" inch sheet at 41" wideOn the rollaway it is 10" under the guideThe rollaway unit can lift or drop the shaft multiple time to complete your L or T perfsHowever if you are scoring at the same time it will lift/drop out on these operations as well Main unit max size 41 x 42 Rollaway 29 x 29...
Straight Shooter takes friction feeding to a new level with these exclusive features: Specifications: • Paper Sizes: 3" (wide) x 2" minimum, 12" (wid...
Straight Shooter takes friction feeding to a new level with these exclusive features: Specifications: • Paper Sizes: 3" (wide) x 2" minimum, 12" (wide) x 17" max(custom size) • Thickness: Single sheets to 3/8" thick • Power requirements: 120 VAC • Speed: Variable, up to 50,000 per hour...
Specifications: • Paper Sizes: 3" (wide) x 2" minimum, 12" (wide) x 17" max(custom size) • Thickness: Single sheets to 3/8" thick • Power requi...
Specifications: • Paper Sizes: 3" (wide) x 2" minimum, 12" (wide) x 17" max(custom size) • Thickness: Single sheets to 3/8" thick • Power requirements: 120 VAC • Speed: Variable, up to 50,000 per hour...
It’s a 2018 Model: TRUVF-30A Model: TRF30 S/N: CONX-3919 Specifications: Size: 30" (76cm) Wide Max Sheet: 30" (76cm) x 26" (66cm) Sheet Thickness:150...
It’s a 2018 Model: TRUVF-30A Model: TRF30 S/N: CONX-3919 Specifications: Size: 30" (76cm) Wide Max Sheet: 30" (76cm) x 26" (66cm) Sheet Thickness:150-600 GSM Sheet Per Hour: Up to 4,800 Power: 220V, 3Ph, 60Hz, 55A Features: Apply gloss-satin and matte coatingsCoat toner based, offset or inkjet with easeQuick change textured rollers for an array of finishesSpeeds of up o 4,800SPHFrom start to coating in less than 5 MinutesLess than 10 minutes to switch between different coatings0 VOC UV coating and wash-up fluid....
The Carl XHC-3300 Paper Punch allows you to punch up to 300 sheets of standard 20 lb bond paper simultaneouslyEquipped with precision-ground Carl pun...
The Carl XHC-3300 Paper Punch allows you to punch up to 300 sheets of standard 20 lb bond paper simultaneouslyEquipped with precision-ground Carl punch heads, the punch slices through stacks of pages with easeA heavy steel base ensures stable and injury-free punchingThe clippings accumulated after the punching are collected in a waste tray and can be easily disposedYou can easily replace the punch headsThe XHC-3300 Paper Punch features a solid heavy-gauge steel construction, and is ideal to be used office, print sho...
Description ZK500/KNIFE FOLDING UNIT The most heavy-duty and remarkable commercial knife folding unit on the marketMakes perpendicular folds—up fol...
Description ZK500/KNIFE FOLDING UNIT The most heavy-duty and remarkable commercial knife folding unit on the marketMakes perpendicular folds—up folds or down foldsAttaches directly to any brand folder, stitcher, collator or trimmer and can also be used off-line for signature folding or any special commercial folding applicationsCan fold to up to a 144-page signature (depending on stock)....
1998 Steinemann Topspot 102 UV Spot Coater –Asking $25,000 ex-site or best offer ((( DO not have a video- Can take one when they run it again)))) ...
1998 Steinemann Topspot 102 UV Spot Coater –Asking $25,000 ex-site or best offer ((( DO not have a video- Can take one when they run it again)))) The Topspot press works like a converted offset pressIt can be used for spot and flood coatingA polymer plate is used for highly accurate applications such as letters and a blanket is used to coat on flood or sheets with glue flaps Max Sheet Size: 40″ x 28″ Min Sheet Size: 20″ x 14″ Sheet Weight: 70 lbs text to 24pt Production Speed: Up to 7,000 sheets/hour The ...
BOBST 1992 model 102-e 40’’ Serial # 63225 w/self scrapping unit Machine # 523835 30 ¾ x 42 ½ max 11 5/8 x 13 ¾ min Breakdown and LOC will be $5...
BOBST 1992 model 102-e 40’’ Serial # 63225 w/self scrapping unit Machine # 523835 30 ¾ x 42 ½ max 11 5/8 x 13 ¾ min Breakdown and LOC will be $5,000 USD...
1997 Bobst SA- SP-102-SE-This machine is raised Automatic Die Cutting machine with stripping Manufactured in Switzerland - Only 17503.8 hours worked...
1997 Bobst SA- SP-102-SE-This machine is raised Automatic Die Cutting machine with stripping Manufactured in Switzerland - Only 17503.8 hours worked! Equipped with: Eagle Foil Non-stop feeder Delivery Thin Plate Centre Line Micro Matrix Adjustment System on Counter Plate One Chase Two Plates One stripping frame Specification: MaxSheet size: 720X1020mm Min sheet Size: 350X400mm Speed: 7,500 Sheet/Hour Cutting Material: Min Paper thickness 80gr/m2 Board paper up to 2,000gr/m2 Corrugate board up to 4mm E, ...
1988 Bobst SP 102 E/US Hours 15325.1 Cutting Force up to 25.0mn (250 Tons) Running speed / Hour up to 7500 sheet Underpower In full Production Full Str...
1988 Bobst SP 102 E/US Hours 15325.1 Cutting Force up to 25.0mn (250 Tons) Running speed / Hour up to 7500 sheet Underpower In full Production Full Stripping Extra— 1 Gripper Position ruler 4 Cutting Plates Branches 4 Cutting Plates 5 Stripping Branches Kicking square for micro-flute corrugated board 18 Pins 28 pin buffers...
1988 Bobst SP 102-CER Die Cutter with Stripping and Blanking 28" x 40" (72cm x 102cm) Maximum Format - 40cm x 35cm Minimum Format 250 Tons Cutting Pre...
1988 Bobst SP 102-CER Die Cutter with Stripping and Blanking 28" x 40" (72cm x 102cm) Maximum Format - 40cm x 35cm Minimum Format 250 Tons Cutting Pressure Counter Reading Approximately 47,480 Hours Non-Stop Feeder Centerline (2) Chases (2) Cutting Plates Stripping Section with Upper/Lower Frames Blanking Section with (2) Frame Assemblies Non-Stop Delivery Platform and Catwalks Easy-Handling System Many Extra Parts Can be seen in operation Available Immediately...
1994 Bobst SP 130-ER Die Cutter with Blanking, 36-3/16" x 51-1/8"Format 500 Tons Cutting Pressure Rated 7000 Counter Reading Approximately 14,463 Hour...
1994 Bobst SP 130-ER Die Cutter with Blanking, 36-3/16" x 51-1/8"Format 500 Tons Cutting Pressure Rated 7000 Counter Reading Approximately 14,463 Hours (2) Side Guides (2) Chases (2) Cutting Plates Centerline Micro-Adjustment Stripping Section with Upper/Lower Frames Blanking Section with (2) Frame Assemblies Non-Stop Delivery Non-Stop Feeder Platform and Catwalks Easy-Handling System Many Extra Parts and Accessories...
1993 Bobst SP102CER-II Die Cutter with Blanking 28" x 40" (72cm x 102cm) Maximum Format 40cm x 35cm Minimum Forma 250 Tons Cutting Pressure Rated 9000 ...
1993 Bobst SP102CER-II Die Cutter with Blanking 28" x 40" (72cm x 102cm) Maximum Format 40cm x 35cm Minimum Forma 250 Tons Cutting Pressure Rated 9000 SPH Counter Reading Approximately 46,122 Hours Non-Stop Feeder Non-Stop Delivery Centerline (2) Chases (2) Cutting Plates Stripping Section with Upper/Lower Frames Blanking Section with (2) Frame Assemblies...
2000 Brausse PE 102/50F Clamshell Die Cutter with 2 Draw Foil 45" x 32" Mobile Bed Size 40" x 29" Inner Chase Size 40" x 29" Max Stamping Area Adjustab...
2000 Brausse PE 102/50F Clamshell Die Cutter with 2 Draw Foil 45" x 32" Mobile Bed Size 40" x 29" Inner Chase Size 40" x 29" Max Stamping Area Adjustable dwell Single Cut or Auto-Run...
2006 Brausse TA 900 C3 - FOLDER GLUER Equipped for S/L, auto-bottom cartons, pocket folders, CD wallets Left & right pre-break devices, 3rd score pre...
2006 Brausse TA 900 C3 - FOLDER GLUER Equipped for S/L, auto-bottom cartons, pocket folders, CD wallets Left & right pre-break devices, 3rd score pre-break by belt, pneumatic compression section, counter/kicker Feeder vibrator, 3 carriers throughout, 2 trombones, speed variator on left & right folder belts, squaring device in folding section for auto-bottoms, wireless remote, cold glue system Very clean, new feeder belts, new carrier belts, 21,700 hours Powered & available for demonstration Good running condition and a...
CAUHE 2000 MODEL VIE DIE PRESS 140 200 CM SER #523 PNEUMATIC PLATE LIFTER 56 X 80 HAND FED PLATEN W/WLECTRONIC SPEED CONTROL AUTOMATIC LUBRICATION AIR...
CAUHE 2000 MODEL VIE DIE PRESS 140 200 CM SER #523 PNEUMATIC PLATE LIFTER 56 X 80 HAND FED PLATEN W/WLECTRONIC SPEED CONTROL AUTOMATIC LUBRICATION AIR CLUCH...
Haskins Automatic Pocket Folder Model HYP-2 Serial 2140 W/trans Table ii w/76 x 26 x 30 1/2 Metal Utility table w/Casters Haskins Valco Glue System M...
Haskins Automatic Pocket Folder Model HYP-2 Serial 2140 W/trans Table ii w/76 x 26 x 30 1/2 Metal Utility table w/Casters Haskins Valco Glue System Model Serail # 0398022 Haskins Pefra Glue System...
2006 Iberica TRK 105 Die cutter 29.53 x 41.34 Blanker Non- stop feeder Quick lock system 2 upper and lower stripping frames 2 chases 10 new 1 mil plat...
2006 Iberica TRK 105 Die cutter 29.53 x 41.34 Blanker Non- stop feeder Quick lock system 2 upper and lower stripping frames 2 chases 10 new 1 mil plates 1 used gripper bar One full sheet rack Set up table for pins Multiple spare parts New gripper bars and chains put on in 2021 Very well maintained...
Kluge Unifold The Kluge Unifold provides both productivity and versatility with a modular system built in the Kluge tradition of quality, durability an...
Kluge Unifold The Kluge Unifold provides both productivity and versatility with a modular system built in the Kluge tradition of quality, durability and value Vacuum Table Vertical Buckle Fold Plate Pile Feeder Stacker Unit Turn Table Max Sheet Size: 29″ x 32″ Min Sheet Size: 6″ x 6″ Stock Range: .006 – .018″ - 100 – 400 gsm Operating Speed: 4,000 – 25,000 pph - 300 fpm...